Single Head Traction
Single Eye Pipeline Traction Cable Grip Type DSG
The single-eye pipeline traction net sheath DSG is a cable net sheath specifically designed for pulling cables within pipes or cable ducts.Single weave,used for stay wire on pipe or cable slot.
Precautions:
1. Although the DSG cable net sheath has high strength and elasticity, avoid excessive bending or twisting during use to prevent affecting its lifespan and performance.
2. The DSG cable net sheath should be regularly inspected and maintained to ensure it remains in good condition. If any wear, deformation, or cracks are found, replace the net sheath promptly.
3. When using and storing the DSG cable net sheath, keep it dry and clean to avoid contact with oil, chemicals, and other harmful substances that could affect its performance and lifespan.
Oveoverweight Load Cable Grip Type WT
The WT cable net sheath is specifically designed to meet the demands of heavy-load cable traction. The materials of cable grip can be divided into hot-dip galvanized, stainless steel 304, and stainless steel 316. The materials of the compression connection parts include aluminum alloy compression, stainless steel compression, and copper sleeve compression.With high tensile strength. It is specifically designed for use with overweight load submarine cables.
Precautions:
1. Although the WT cable net sheath has high strength and elasticity, avoid excessive bending or twisting during use to prevent affecting its lifespan and performance.
2. The WT cable net sheath should be regularly inspected and maintained to ensure it remains in good condition. If any wear, deformation, or cracks are found, replace the net sheath promptly.
3. When using and storing the WT cable net sheath, keep it dry and clean to avoid contact with oil, chemicals, and other harmful substances that could affect its performance and lifespan.
Minitype Single Eye Rubber Protective Cable Gri...
The micro single-eye rubber protective net sheath DSC is a cable traction tool designed specifically for small equipment or precision instruments. Its unique design and material make it an excellent choice for providing outstanding protection and traction in various complex environments.
Precautions:
1.While the DSC cable net sheath boasts high flexibility and elasticity, it is advisable to avoid excessive bending or twisting during use to preserve its longevity and performance.
2.Regular inspections and maintenance of the DSC cable net sheath are essential to ensure its optimal condition. Promptly replace any parts showing signs of wear, deformation, or cracks.
3.To maintain the performance and lifespan of the DSC cable net sheath, keep it dry and clean at all times, avoiding exposure to oil, chemicals, and other harmful substances.
Monocular Multi-Strand Cable Grip Type TGM
The single-eye multi-stranded cable net sheath TGM is an efficient and practical cable traction tool widely used in various industrial and construction fields. It is mainly used for cable head traction, as a middle load network sleeve, for the dragging and traction of wires and cables, using double strand, multi strand and other weaving methods.
Precautions:
1. Although the TGM cable net sheath has high softness and elasticity, avoid excessive bending or twisting during use to prevent affecting its lifespan and performance.
2. The TGM cable net sheath should be regularly inspected and maintained to ensure it remains in good condition. If any wear, deformation, or cracks are found, replace the net sheath promptly.
3. When using and storing the TGM cable net sheath, keep it dry and clean, avoiding contact with oil, chemicals, and other harmful substances to prevent affecting its performance and lifespan.
Single Eye Rubber Protective Cable Grip Type MGH
The single-eye rubber protective net sheath MGH is a tool used for cable traction and protection.Used for dragging on cable head using the single strand soft silk weaving, single eye type, advantages:flexible, cable easy pass through the bend. Middle road load cable grip,wires,drag, in electricity disk or dragging cable.
Precautions:
1. Although the MGH rubber protective net sheath has high softness and elasticity, avoid excessive bending or twisting during use to prevent affecting its lifespan and performance.
2. Regularly inspect and maintain the MGH rubber protective net sheath to ensure it remains in good condition. If any wear, deformation, or cracks are found, replace the net sheath promptly.
3. When using and storing the MGH rubber protective net sheath, keep it dry and clean, avoiding contact with oil, chemicals, and other harmful substances to prevent affecting its performance and lifespan.
Monocular Single Strands Cable Grip Type MG
The single-strand, single-eye cable net sheath (pre-branched net sheath) is a specialized tool used for the head traction of cables.Used for cable head traction, using the single strand soft silk weaving, single eye, advantages: flexible,cable easy pass through the bend.
Precautions：
1. Choose the correct specification of the single-strand single-eye net sheath based on the cable diameter and traction load. A too small net sheath may not effectively wrap the cable, while a too large one might result in insufficient traction force or damage to the cable.
2. Although the single-strand single-eye net sheath has high flexibility and elasticity, avoid excessive bending or twisting during use to prevent affecting its performance and lifespan.
3. After using the single-strand single-eye net sheath, conduct regular inspections and maintenance. Check for wear, deformation, or cracks in the net sheath, and replace it if any issues are found. Additionally, keep the net sheath clean and dry to prevent rust and corrosion.
Dragging Cable Grip Type MGS-M
The traction cable net sheath MGS-M product is an important tool used in electrical construction for the traction installation of cables or steel wire ropes.It is mainly used for cable head traction, as a middle load network sleeve, for the dragging and traction of wires and cables, using
double strand, multi strand and other weaving methods.
Precautions：
1. Ensure that the selected specification of the traction cable net sheath MGS-M matches the diameter of the cable or steel wire rope being towed. Different models of the traction cable net sheath MGS-M correspond to different rated loads and applicable cable outer diameter ranges. Choosing the appropriate specification ensures safety and efficiency during the towing process, preventing damage or accidents due to overloading or mismatching.
2. When installing the traction cable net sheath MGS-M, ensure it opens correctly and fully covers the cable or steel wire rope. Avoid twisting or overstretching the net sheath, as this can affect its performance and lifespan. Also, make sure the net sheath is securely fastened to prevent it from falling off or shifting during the towing process.
3. During the towing process, control the towing speed to avoid excessive force on the cable or steel wire rope that could cause breakage. Additionally, avoid sudden acceleration or deceleration to prevent shock and damage to the net sheath and cable.
Dragging Cable Grip Type MGS
The traction cable net sheath MGS product is an important tool used in electrical construction, mainly used for cable head traction, as a middle load network sleeve, for the dragging and traction of wires and cables, using double strand, multi strand and other weaving methods.
Precautions：
1. At the beginning of traction, minor local slippage of the net sheath is normal.
2. When selecting and using traction cable net sheaths, choose the appropriate specifications and materials based on the specific diameter of the cable or steel wire rope and the usage environment.
Dragging Cable Grip Type TG
The TG model traction cable mesh sleeve is a medium-distance, heavy-duty mesh sleeve specifically designed for the head traction of cables. It is mainly used for cable head traction, as a middle load network sleeve, for the dragging and traction of wires and cables, using double strand, multi strand and other weaving methods.
Precautions：
1. Before starting traction, carefully inspect whether the mesh sleeve is fully tensioned on the object being towed. Only after confirming that everything is correct, can it be used normally.
2. The cutting sharp corners of cables and oil pipes should be wrapped and polished to prevent the corners from cutting the rope cover or affecting the expansion and contraction of the mesh sleeve.
3. At the beginning of traction, slight local sliding of the mesh sleeve is normal, but overall stability must be ensured.
4. Ensure that the mesh sleeve used conforms to its design and application range. Mesh sleeves that do not meet the application range must not be used.
Rugged Multilayer Multi-Strand Cable Grip Type TGK
Multi-layer design: Generally made of multiple layers of high-strength steel wire or other durable materials woven together. Common examples include double-layer and triple-layer structures, where each layer intertwines with the others to increase overall strength and stability, allowing for better resistance to forces from different directions.
Mesh material: The use of stainless steel or hot-dip galvanized multi-strand thin steel wire and other materials, each share has a certain flexibility, multiple strands combined to ensure a certain degree of softness in order to closely fit the cable, but also has a strong tensile ability.
Crimping part: The material of the crimping part can be divided into aluminum alloy sleeve, copper sleeve, stainless steel sleeve.
Single Strand Braided Cable Protection Mesh
Our single strand braided cable protection mesh is a protective device designed for pipes or cable ducts. It has a high degree of flexibility, moderate softness and excellent elasticity, allowing it to easily adapt to bends while protecting the cable from damage. This protective mesh is abrasion and corrosion resistant and is tightly woven to ensure that cables can pass safely through the opening without any damage.
Our products are available in three different compression connection materials: aluminum sleeving, copper sleeving and stainless steel sleeving to meet the needs of different environments. The compression connection part is made by Swedish TALURIT and Taiwanese WIROP hydraulic presses, which ensures a smooth appearance of the connection and high tensile load.